Under $500

The most versatile CNC at any price point.

Versatile

See some of the things it has helped make.

Forums

People that enjoy helping and sharing.

Firmware

Any control board, any firmware.
New foot.

New foot.

It is finally here, two years later, a new foot. Why, this one is better. Why is it better, more rigid and easy to adjust. Use some number 6 or equivalent screws and washers to hold them down. There are slotted and oversized holes so you can move them around to get...

3 Years of V1 Engineering

3 Years of V1 Engineering

3 years...3 amazing years. I still get up excited to do what I do. I still don't know what to call it. I tell my friends I have to get some work done...even though it usually does not feel like work. I work longer hours and more days than ever before in my life and...

Circuit Cellar and Ed Nisely

Circuit Cellar and Ed Nisely

The current March 2018 issue of Circuit Cellar has a very informative article in it. Ed Nisley did an in depth look at steppers and drivers. If you have ever been lost as to what effect speed and step rate have on your steppers this should clear it up. This really...

Dui on HACKADAY!

Dui on HACKADAY!

Dui!!!!! You are an animal! Water cooled hot end, Plasma table / faraday mod, lost PLA cast aluminum parts..... HACKADAY The actual Instructables link. Dui's forum thread Link.

Digital Machinist – Ed Nisley

Digital Machinist – Ed Nisley

The new edition of Digital Machinist is out, Volume 12 No.4 Winter 2017. Mr. Ed Nisely has a six page article in there. That article is six glorious pages all about the MPCNC!!!!! I am a subscriber, but my magazine isn't here yet. I drove 45 minutes to the nearest...

Milled / Printed 3D Printer -V2-

Milled / Printed 3D Printer -V2-

The new edition of Digital Machinist is out, Volume 12 No.4 Winter 2017. Mr. Ed Nisely has a six page article in there. That article is six glorious pages all about the MPCNC!!!!! I am a subscriber, but my magazine isn't here yet. I drove 45 minutes to the nearest...

Ed Nisley Knows

Ed Nisley Knows

Who doesn't need another printer??? Filling in the details slowly, https://www.v1engineering.com/projects/project-3d-printer/ MP3DP -V2- This is my take on a Prusa I3, with a CNC mill friendly frame. This is my MP3DP -V2- Milled/Printed 3D Printer Version...

Auto Square, Dual EndStops

Auto Square, Dual EndStops

I have seen Mr. Nisely's blog "The Smell of Molten Projects In The Morning" a few times now. Just this evening I followed a twitter link and ended up there again. Each time I get lost in the rabbit hole of impressive work, detailed notes, and writing abilities I will...

Archim Giveaway -Jason Wins!!!!!

Archim Giveaway -Jason Wins!!!!!

I feel this is huge for the MPCNC and any other dual drive machine, on both X and Y axis or even just one dual drive axis. Update 11/4/17 - The was actually the first merge, Andy M was testing the Dual endstop beta and found an issue. Jeffeb3 Jumped in and had a fix...

A Unique Idea In 3D Printing.

A Unique Idea In 3D Printing.

Enter to win a full UltiMachineĀ ArchimĀ v1.0a bundle, or if you would prefer I have a MKS SBase v1.3. These are test boards I have and am not using, not brand new but also I would not call them used. I thought it would be fun to run a little contest. If this goes well...

Jhitesma, Flight Test

Jhitesma, Flight Test

A lot of us feel we are pretty smart, we retain information, and we are able to differentiate the fact from the fallacy. The truly gifted thinkers are ahead of all that and blaze a new trail, they provide the information and the new idea for the rest of us to use and...