Z Height Between XY Tubes

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Z Height Between XY Tubes

This topic contains 4 replies, has 3 voices, and was last updated by  Ryan 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #106423

    sgtpepperaut
    Participant

    I am trying to construct my own XY tube/pipe mounts using some TSlot profiles. I was wondering if somebody could tell me the Z height differences between the center of the pipes where they are mounted on top of each other in each corner.

    Asking for the 25mm VERSION

    i hope this picture makes it clear. Im looking for the length of the green line.

     

    thanks for any help.

    #106452

    Bryan J
    Participant

    It would be the outside radius of the tubes times 2 plus the minimum thickness of the Spacer_Corner_X.STL that nests between them.

    Since the tubes are the same it would be outer diameter plus your corner spacer min thickness.

    • This reply was modified 1 month ago by  Bryan J.
    #106480

    Ryan
    Keymaster

    I am not at the CAD computer right now. Best practice is to still use the spacer I provide.

    #106611

    sgtpepperaut
    Participant

    thanks for the replies. unfortunately its hard to determine the Dimensions in the STL file … and i dont wanna print them just to measure. but thanks for the input guys.

     

    #106616

    Ryan
    Keymaster

    The center to center distance of every build is 27.5mm.

    1 user thanked author for this post.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.