Z Axis knobs

This topic contains 3 replies, has 3 voices, and was last updated by  John 5 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #87320

    John
    Participant

    Hey people,

    I made this for my Z axis lead-screws.  I found quite a few on thingi but most didn’t have threads, and the ones that did, only went in not very far.

    It is not very easy to screw in, I drilled the first 5 mm with an 8mm drill bit and then it was alot better, still tight, which is what I wanted.

    Anyway, let me know what you thinkScreenshot_112

    Attachments:
    3 users thanked author for this post.
    #87339

    Barry
    Participant

    Neat!

    #87341

    Dakota Jim
    Participant

    This is great! Is it on thingiverse?

    #87368

    John
    Participant

    I just uploaded it mate.  https://www.thingiverse.com/thing:3404016

    2 users thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.