z axis coupler

Tagged: ,

This topic contains 4 replies, has 3 voices, and was last updated by  Maroc 8 months, 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #55628

    Maroc
    Participant

    Hello all,

    I just ordered the kit and i have been assembling the machine.  on the website https://www.v1engineering.com/assembly/z-mount/, i have both the pineapple coupler and the aluminum coupler, which should i use?

    #55629

    Mike
    Participant

    For T8 leadscrew, use the aluminum spring coupler, if you are using the 5/16 threaded rod, then use the pineapple coupler. I’m pretty sure the kits ship with the T8.

    1 user thanked author for this post.
    #55630

    Maroc
    Participant

    Ok, that was my problem, i wasn’t sure if the kit came with the leadscrew or the the 5/16 threaded rod.

    #55641

    Ryan
    Keymaster

    Yup T8 and aluminum coupler. I will see if I can clarify the instructions.

    #55649

    Maroc
    Participant

    thanks alot 😀

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.