Z axis assembly issues

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Z axis assembly issues

This topic contains 2 replies, has 3 voices, and was last updated by  Hansang 11 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #29216


    I’be been having trouble let assembling the Z axis. I can seem to get all the hole to line up.

    Any one have any suggestions on how to make sure the holes drilled into the condunit will match the hole in the printed parts consistantly?

    Thanks in advance,



    Over size the holes you drill, they do not locate anything, they are there form clamping. I think my drawing specs up to an 8mm hole.



    And you don’t have to drill the holes through the conduit. Just one side for the black nut trap (if you’re looking at the pic in the assembly section). I made the mistake of drilling through the conduit and trying to line it up perfectly.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.