- October 15, 2017 at 3:49 am #46006October 15, 2017 at 9:36 am #46024
Interesting…Looks cool so far.October 15, 2017 at 10:14 am #46027October 15, 2017 at 10:16 am #46031
Not at all, If you look up some of the older parts there are ones that use less bearings and would be better suited for that. djk4linux uses them in a lot of his projects.
How are you going to make the X axis, Stacked?October 15, 2017 at 10:24 am #46033Not at all, If you look up some of the older parts there are ones that use less bearings and would be better suited for that. djk4linux uses them in a lot of his projects. How are you going to make the X axis, Stacked?
Yeap stacked I have space on top so probably I will move head more up to get some Z movement. and I will try to lower Y carriage so I will get some sort of pan under just in case if it will start to be really dirty machine. I don’t think so that bearings are problem they are so cheap if you compare them to so other solution. just don’t know yet how to solve head of Z it need to be very sturdy because it will be a lot of force going in each direction. For print machine in that destine is 550×580
and work plane about 200×300.October 15, 2017 at 5:06 pm #46050
Could you mount skate wheels parallel to the X axis in the Y axis mounts, then rotate them equally to move the piece left and right? You would need the piece to be heavy, or vacuumed down perhaps, though.
You must be logged in to reply to this topic.