- July 11, 2017 at 10:35 am #37982
I already have Fusion 360 which I use but don’t know which post processer shall I use to generate G code for MP CNC, Otherwise for Marlin software to work. Can some one help me please?July 12, 2017 at 9:02 am #38086
RyanKeymasterJuly 12, 2017 at 9:12 am #38091
Thank you for the help again. this is my first cut after I succeeded loading the processor to Fusion 360
Not bad ha?
Attachments:July 12, 2017 at 9:21 am #38093
WOW! If that is your first cut….I can’t wait to see the next few.July 12, 2017 at 9:27 am #38096
thanks. I just posted my second project I finished very late last night check it out I think it’s a killer 🙂July 12, 2017 at 10:51 am #38108
This one took 2 1/2 hr. to cut, and one hr. to stain and lacquer and assemble.
Boy a lot of mess, 🙂 and work. but Beautiful. used a 1/4 in. flat bit. and 3 inch thick poplar stock.
Attachments:July 12, 2017 at 10:53 am #38110
Someone’s liking their MPCNC now 😀 Nice work, someday I want to try some woodworking on mineJuly 21, 2017 at 4:20 pm #39066
BarryParticipantSomeone’s liking their MPCNC now 😀 Nice work, someday I want to try some woodworking on mine
Yea, most of us started swimming in the kiddy pool, you’re all like “Screw it, I’m swimming the English Channel!”July 21, 2017 at 5:18 pm #39067
Holy crap. That Harley sign looks amazing. As well as the key hanger. Can’t wait to get this thing built. Hope to make some serious assembly progress this weekend.
You must be logged in to reply to this topic.