Very good prospects LowRider CNC (maybe)

New Home Forum LowRider Hardware Development – LowRider Very good prospects LowRider CNC (maybe)

This topic contains 4 replies, has 3 voices, and was last updated by  David 11 months, 4 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #27857


    Hi guys.
    Maybe I’m in a hurry, but I would like to know your opinion.
    Are there any prospects “LowRider CNC” to become a 3-D printer with a large work area?
    There is such a project as “Cincinnati BAAM 3D printer”
    What allows this printer impresses.
    Working zone a “LowRiderCNC” allows you to work with virtually the same size, but needs:
    – good extruder with large diameter nozzle with vibro-smoothing system;
    – plastic feeding system;
    – table heating system;
    – it will be necessary to solve a lot of technical problems, but…
    If this were possible, then we will have a very promising device for the coming years, which may make very good money.
    Not one of the open source projects can not boast of such prospects, as LowRiderCNC.
    This is a very promising theme!

    Your thoughts?



    You can do it now, lots of big extruders already available, all kinds of methods for a heated bed if you really need it, I am just not sure how much usable z you can get out of this.



    Problems may arise primarily from z-axis height, but this can be solved in the future. As developments, I will add to this topic their achievements on this project. I believe that it will be useful to other engineers.



    On the big 3d printer will make a perfect plastic pellet feed system. At the moment, there are several ready-made projects, here for example:




Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.