Unused MPCNC printed parts

This topic contains 3 replies, has 2 voices, and was last updated by  Spike 1 week, 5 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #104374

    Zsolt
    Participant

    I printed the Burly 1 inch parts in orange PLA+ with a 0.5 nozzle. It’s not the cleanest looking print, but the sturdiness is there. I decided to go the LR2 direction so they’re up for grabs. I’m in Central Coast California. $50 and I’ll throw in the shipping. Let me know if you’re interested.

    IMG_0717

    Attachments:
    3 users thanked author for this post.
    #105031

    Spike
    Participant

    Interested in these, are they for 3/4 conduit or 1  inch SS tube?

    I need center supports too, one pair.

    Thanks Spike

    #105040

    Zsolt
    Participant

    Hi Spike, sorry I forgot to specify, they’re for the 23.5mm OD conduit. I can print the center supports too, however I’ll be out of town for the upcoming two weeks. Let me know if you’re interested though.

    Cheers

    #105121

    Spike
    Participant

    I’ll take them, let me know when ready to get payment, and ship

    Thanks Spike

    [email protected]

     

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.