Universal (HicWic) LR2 tool mount

New Home Forum LowRider Hardware Development – LowRider Universal (HicWic) LR2 tool mount

Tagged: 

This topic contains 3 replies, has 2 voices, and was last updated by  doc 2 weeks, 3 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #115772

    doc
    Participant

    I decided to mashup SomeOldGuyCoding’s laser mount for the LR2 and the good ‘ole universal tool mount created by HicWic for the MPCNC.

    I made some modifications to  both models (mainly eliminated unnecessary elements and cleaned up some edges). Just use the top braces/arms that SomeOldGuyCoding created.

    This is a thing in progress (it is printing as I write this) – I am sure it will work well.

    https://www.thingiverse.com/thing:3885228

    Enjoy!

    #115817

    doc
    Participant

    It works wonderfully!

    IMG_20190928_202718__01

     

    IMG_20190928_202708__01

     

    IMG_20190928_203205

    IMG_20190928_203107__01

    IMG_20190928_203100__01

     

    • This reply was modified 3 weeks ago by  doc.
    • This reply was modified 3 weeks ago by  doc.
    • This reply was modified 3 weeks ago by  doc.
    • This reply was modified 3 weeks ago by  doc.
    • This reply was modified 3 weeks ago by  doc.
    • This reply was modified 3 weeks ago by  doc.
    1 user thanked author for this post.
    #115826

    Jeffeb3
    Participant

    Well, that certainly adds a lot of options!

    #116419

    doc
    Participant

    Well, that certainly adds a lot of options!

    It does and everything I have tried so far works very well.  I even put my 500w spindle on there for giggles – it looked funny having the spindle and dw611 together (also, the mount is probably not rigid enough to hold a spindle and cut anything with it outside of 0.5mm DOC).

    Now to measure the offset from the center of my laser beam to the center of my dw611 collet… dust will fly soon.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.