Two weeks in and the machine just paid for itself!

New Home Forum Things You Have Made Two weeks in and the machine just paid for itself!

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by  Kenny Carnes 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #101345

    Kenny Carnes
    Participant

    Started with a 16″ x 16″ build area. That lasted just over a week and I blew it apart and stretched to 49″ x 25″.

    Just because I came up with a paying job making Greek Key molding. I didn’t know what that was till a friend asked if I could make it.

    Greek-Key-Molding

    Absolutely beautiful! Thanks again Ryan for a great design.

    2 users thanked author for this post.
    #101357

    Ryan
    Keymaster

    Music to my ears!

    #101376

    Erwin Vigilia
    Participant

    Nice! What kind of wood is that? Bit, DOC, etc?

    #101483

    Kenny Carnes
    Participant

    3/4″ maple. Actually bought it already dressed to 3/4 x 5-1/2″ $2.50 lf. 1/4″ 2 flute spiral upcut Freud bit from Home Desperate. First pass on the carve cuts 1mm per pass to 10mm deep. Finish pass 3mm each to 10mm. Outside cut 18.5mm deep to leave a thin skin so as not to cut into the spoil board. Running at 20 mm/sec. 3 hr 22 min total cut time to make 42″ piece of 4″ trim. $25 per foot.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.