Truing the X/Y travel to maintain 90 degrees.

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Truing the X/Y travel to maintain 90 degrees.

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 3 weeks, 3 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #76344

    Michael Rand
    Participant

    I inherited this MPCNC with Mini-Rambo and Marlin V1.3a recently. I rebuilt the support legs to raise the rails by 3″. Effective max travel is about 750mm in the X direction and 430 in the Y. At the max travel extents, the X/Y describes a 92 degree angle. How do I true it back to 90?

    Thanks for any help.

    #76345

    Ryan
    Keymaster
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.