Touch Plate

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  Jeffeb3 1 week, 6 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #120011

    Wayne
    Participant

    Yes I know this has been covered in depth and I have read the articles numerous times, But for the love of me I am still at a loss with the z min. I read Ryan’s reply that said negative and signal wires are all you need to connect, and a feeler gauge and alligator clip would do the job. The Board I am using is a rambo mini supplied by V1 as I am not comfortable with changing codes yet, I have put a multi meter on the z min pins and think the negative is the middle one but am not sure which one is the signal. I know you guys are switched on but as I am so far away I don’t want to risk damaging my little machine. Its OK if you laugh at me but I would appreciate a little assistance in this area please.

    Cheers the little Aussie

    #120017

    Wayne
    Participant

    Solved, it pays to read the wiring diagram in nice white letters it shows what I was after. thanks anyway hope to keep reading articles on the forum almost to much information at times.

    Cheers the little Aussie

    #120023

    Jeffeb3
    Participant

    Its OK if you laugh at me but I would appreciate a little assistance in this area please.

    It is totally OK to be laughed at. But FWIW, this is a good question and an honest mistake. Don’t worry about it and keep the questions coming. I love to help someone who is trying, and it’s even easier when it’s something easy. Glad you got it figured out though.

    2 users thanked author for this post.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.