Spoilboard almost ready to be levelled.

New Home Forum LowRider Hardware Development – LowRider Spoilboard almost ready to be levelled.

This topic contains 3 replies, has 2 voices, and was last updated by  Jeff 6 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #81665

    David
    Participant

    Spoilboard almost ready to be levelled.

    #81977

    Jeff
    Participant

    OMG!  That’s gonna be one heck of a level bed!  How are you going to make sure that you don’t hit all the “screws” with your bit when doing through cuts?  I would love a more level bed and am looking at ideas.  I just haven’t spent the time to mess with mine enough.  I’ve been too busy using it.  Lol.

    #82156

    David
    Participant

    The nut inserts are on the bottom side. It is 3/4″ mdf. The inserts are 13mm long. There is plenty of surface to be planed off. The mounting screws are countersunk below the nut inserts.

    #82193

    Jeff
    Participant

    That’s brilliant!  Please post more pics as you continue. This is a gr at add-on to the LR2!

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.