setting up axis movement

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC setting up axis movement

This topic contains 1 reply, has 2 voices, and was last updated by  Bill 4 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #98547

    CST
    Participant

    Don’t understand why Pointer face is coming back with this when I try moving to make sure 10mm is 10mm, nowhere near stops
    echo:endstops hit: Z:6.58
    echo:endstops hit: Z:12.02
    echo:endstops hit: Z:5.73
    echo:endstops hit: Z:-4.27
    echo:endstops hit: Z:5.08
    echo:endstops hit: Z:10.90
    echo:endstops hit: Z:14.17
    echo:endstops hit: Z:17.03
    echo:endstops hit: Z:29.18
    echo:endstops hit: Z:34.57
    echo:endstops hit: Z:9.74
    echo:endstops hit: Z:6.46
    echo:endstops hit: Z:2.56
    echo:endstops hit: Z:-6.66

    Attachments:
    #98644

    Bill
    Participant

    Do you have endstops configured in your firmware? It sounds like you have Z triggered all the time.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.