Road and Water Maps Engraving

New Home Forum Things You Have Made Road and Water Maps Engraving

This topic contains 3 replies, has 4 voices, and was last updated by  Dead Gretta 1 week, 5 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #104266

    Adam
    Participant

    I saw this video from Jackman Works and figured I could do the same or expand on the concept a little

    https://youtu.be/gSjOcoxoHD0

    My work flow differs massively from the video, mainly using Maperitive and Corel Draw instead of the Open Street Map web viewer and Adobe Illustrator (cause it’s complete crap for large svgs)

    All the water features were cut first and then filled with resin and then the roads were cut and the whole panel spray painted and then sanded. They are finished with polyurethane

    final dimensions: ~35h x 29w (4 panels 17.5h x 14.69w)

    4 users thanked author for this post.
    #104276

    Jeffeb3
    Participant

    Great work! That looks awesome.

    1 user thanked author for this post.
    #104278

    Ryan
    Keymaster

    WOW!

    1 user thanked author for this post.
    #105127

    Dead Gretta
    Participant

    just got all my parts from Ryan, still waiting on my steel tubes. great to see this, it was something i had considered, but for a large scale DnD type map.

    thanks for sharing!

    DG

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.