Ramps 1.4 and Estlcam

This topic contains 1 reply, has 2 voices, and was last updated by  Bill 5 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #83466


    Hi there,

    I have three questions about using Estlcam together with the Ramps 1.4 Controller.

    1. Is it right that with Version 11 Estlcam can’t be used with the Ramps 1.4 anymore?
    2. Can you use Estlcam just with its own firmware wich is loaded through the Estlcam interface in Version 10?
    3. Is Estlcam supporting dual endstops?

    Thanks for your help!




    You don’t want to use the EstlCAM firmware with your MPCNC. The version that Ryan provides is well supported and is updated pretty regularly. The version that was from EstlCAM was just a test and he decided not to continue support for it. The process that we all recommend is to use EstlCAM to generate your gcode, then Repetier-Host to connect to your machine and transfer the code. Use the latest EstlCAM to generate your gcode, it’s currently at 11.x.

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.