RAMBO v1.3 + CNC.js

This topic contains 1 reply, has 1 voice, and was last updated by  mulze32 1 year, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #54195

    mulze32
    Participant

    Hey all,

    I built a MPCNC two summers ago and was using RAMPS + OctoPi, had to tear it down due to space constraints but now have resurrected it. Anyways this time I’m using a RAMBO board and would like to use CNC.js as my headless server interface. I have the Pi setup with CNC.js and I believe that I can connect to the RAMBO board (I’m using non-Dual endstop firmware) using the Pi but I can’t issue any commands to it. I have the baud rate set to 250000 but still nothing. I confirmed with Repetier that all of the axes can move but CNC.js gives me nothing.

    Any help / suggestions that you could provide would be most excellent.

     

    Let me know if I need to clarify anything.

    #54590

    mulze32
    Participant

    So as an update: I was able to get it working. Not sure what was broken but to solve it I ended up reinstalling CNC.js using the instructions on the CNC.js wikipage. Now to the calibration of the machine!

     

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.