Rambo not turning on

This topic contains 6 replies, has 4 voices, and was last updated by  Ryan 1 week, 4 days ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #113219

    Colby
    Participant

    Hi all,

    I have purchased the kit with the full Rambo, and was trying to manually move it via the Repetier software. The axis did’t move when I tried, so I unplugged the Rambo and plugged it back in. However, the Rambo didn’t turn back on. I have checked everything, the connections and outlet, and nothing seems out of the ordinary. Is there a way to get it back on?

    Edit: I just checked the voltage of the connector to the Rambo, and it was correct. This leads me to believe that it is a problem with the Rambo. I know about this other topic: https://www.v1engineering.com/forum/topic/rambo-does-not-power-up/ however, I have tried the solution and it sadly did not work for me. Maybe a fuse is out?

    Thanks in advance!

    • This topic was modified 1 week, 5 days ago by  Colby.
    • This topic was modified 1 week, 5 days ago by  Colby.
    • This topic was modified 1 week, 5 days ago by  Colby.
    • This topic was modified 1 week, 5 days ago by  Colby.
    #113340

    Jeffeb3
    Participant

    You can check the fuses easily enough. They should read close to zero ohms on the multimeter.

    1 user thanked author for this post.
    #113510

    Colby
    Participant

    file:///C:/Users/colby/Downloads/InkedIMG_2808_LI.jpg

    Tested both small fuses and found that one didn’t give a read (circled in red).

     

    (sorry for the link, you will have to copy and paste the URL to view the image)

    • This reply was modified 1 week, 4 days ago by  Colby.
    #113514

    Geoffrey
    Participant

    file:///C:/Users/colby/Downloads/InkedIMG_2808_LI.jpg

    That is linked to your hard drive.  It won’t work no matter what.

    #113525

    Colby
    Participant

    Whoops sorry about that. I didnt see the attachment option at the bottom

    • This reply was modified 1 week, 4 days ago by  Colby.
    • This reply was modified 1 week, 4 days ago by  Colby.
    #113526

    Colby
    Participant

    Here it is:

     

    Edit: I ordered a 10 pack off of amazon once I switched the fuses and a light came on, confirming my suspicions.

    Thanks your all your help!

    • This reply was modified 1 week, 4 days ago by  Colby.
    • This reply was modified 1 week, 4 days ago by  Colby.
    • This reply was modified 1 week, 4 days ago by  Colby.
    #113561

    Ryan
    Keymaster

    I have fuses available or you can get them from digikey/mouser. Maybe upload a picture of your wiring so we can see what caused to pop.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.