Rambo marlin dual endstop issue

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Rambo marlin dual endstop issue

This topic contains 1 reply, has 2 voices, and was last updated by  Bill 3 weeks, 2 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #118721

    Paul Meyer
    Participant

    Marlin rambo endstop problem.
    Using rambo t8 16t dual endstop firmware

    M666 reads dual endstops adjustment (mm)
    x2: 0.00
    y2: 0.00
    I do not see x and y readings

    M119 reads x min , x2 min, y min, y2 min open on all when not activated

    They all read triggered when switches are activated in home position.

    However steppers will still move more past it?

    #118897

    Bill
    Participant

    Endstops do not stop when you are moving except during the homing process.

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.