Rabmo Wiring

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 4 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #100805

    Hi i purchased the Rambo Board and wiring from v1. I have not found a walk trough on the wrining harnesses. Couple questions…

    1-I have several loose connectors that came with the kit (ie they are not wired up at all) do i used those to replace/rewire the harnesses (for the x,y and z) to match the rambo diagram? At current the wire colors DO NOT match the diagram on V1 ( see picture.)

    2-I have a couple 2 wire lose blocks that came with the kit what are they used for? See picture


    Total new to this. Thanks for the help.





    If you bought a wiring kit you only need to add power. The rest are spares.



Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.