Popular Woodworking Outfeed Table

New Home Forum LowRider Hardware Development – LowRider Popular Woodworking Outfeed Table

This topic contains 7 replies, has 4 voices, and was last updated by  Bill 3 days, 18 hours ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #93935

    Jeffeb3
    Participant

    CNC Outfeed Table

    Seems pretty slick, and I am guessing it would fit a Low Rider with just a few adaptations.

    2 users thanked author for this post.
    #112634

    Farmer
    Participant

    I was actually considering either this idea, or putting a center spindle to flip the table over, out of the way, when not in use. Not sure which idea I like better, but one of these two ideas must work.

    #112636

    Jeffeb3
    Participant

    Please share what you come up with. I love seeing the different table designs.

    #112642

    Bill
    Participant

    That looks like it’s better suited to an MPCNC instead of a Low Rider. With a Low Rider I’d just park the XZ on the end away from your table saw…

    #112644

    Jeffeb3
    Participant

    If you have a 4′ outfeed table, you can cut 8+ feet. Having the gantry out in the end would get in the way.

    #114400

    Farmer
    Participant

    Will definitely share when complete

    #114410

    Barry
    Participant

    Hey Bill, do you have a funky signature or something?

    billsig

    Attachments:
    #114585

    Bill
    Participant

    I don’t see that artifact here… I don’t think I’ve got a signature at all. 🙂

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.