Please, look at this before you ask a question. Thanks

New Home Forum LowRider Troubleshooting – LowRider Please, look at this before you ask a question. Thanks

Tagged: 

This topic contains 2 replies, has 3 voices, and was last updated by  Bill 1 month, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #70141

    Ryan
    Keymaster

    1- Pictures. 99% of the time A few pictures of your entire build will help, including electronics. We do not care about empty pizza boxes and nasty wiring. Seriously if you do not get any further….show some pictures.

    2- Link it. If you are using something you did not buy from here, link it. We don’t care where you choose to spend your money. We only care about getting you going as smoothly as possible. Saying “I bought the recommend part” 100% does not help.

    3- Software. This leaves software. Run my crown Gcode. Did it work perfectly with a pen? Yes=continue….No=send pictures and links. The crown should be perfect if not it is pointless to move on. If that is good details of all the software you are using (too many times we get ten questions in and find out I am talking Estlcam and they are using something else). Screen shots help, dropbox or drive links to your files and gcode help.

    4- New. Start a New thread. Even if you think you are having the exact same issue, please start a new thread.

    5 users thanked author for this post.
    #116508

    Kevin
    Participant

    New to fourm could you point me to the right place want to know what kits I need to purchase form your site and what extra will I need to purchase else where to complete a lowtider2? Know you must answer this question I just can’t find the answer thanks for your help!

     

     

    #116533

    Bill
    Participant

    It’s been asked any number of times, and you are really close to where you should look. 🙂 You want the Advice section, not Troubleshooting. This section is for those who’re either in the process of building or already up and running but having an issue (or six).

    1 user thanked author for this post.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.