September 21, 2016 at 9:46 am #18074
I know it is going to be a pain, but this machine is built and used differently by everyone so we need more details than most.
A video is going to be key, nothing fancy at least 30 seconds of cutting preferably with a close up of the cut and then a bigger shot of the machine.
Machine size is important, especially the z height and length.
Bit type (pics help)
Depth of cut
Material being cutJanuary 6, 2017 at 6:29 am #24425
Just so I’m certain of what you’re asking, You’re asking for a MPCNC 525 tour and video of cuts, from those of us capable of doing so? I can probably do some videos, mostly the ones I have published on youtube already that you’ve seen have been mostly me sharing short vids with my coworkers, but I could up the production quality a fair bit if I was trying to “sell the machine” rather than “hey look at this!”January 6, 2017 at 8:04 am #24429
No. This is what will make troubleshooting issues easier than the normal “It’s not working, how do I fix it?” posts.January 6, 2017 at 8:31 am #24430
Ahh, totally didn’t catch on that it was for people needing assistance. Got it.January 11, 2017 at 5:11 am #24676
I easily printed and put together this machine but when it comes to electronics I am having trouble.
Connected as indicated all the cables and boards with power supply and the PC but there is no sign of life when it comes to move the steppers.
I installed Repetier-host 1.62 and Estlcam V9 Beta. Connected Repetier through Com4 port with Rams.
Any idea what did I do wrong??
Any help will be appriciated
You must be logged in to reply to this topic.