North Carolina LowRider2 build

New Home Forum LowRider Your Builds – LowRider North Carolina LowRider2 build

This topic contains 17 replies, has 7 voices, and was last updated by  Barry 3 weeks, 4 days ago.

Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • #79567

    David
    Participant

    My 24×48 useable area, LowRider2 is slowly coming together.

    • This topic was modified 2 months, 4 weeks ago by  David.
    #79594

    Ryan
    Keymaster

    Fun Sized, just like my current build. Nice.

    #79828

    David
    Participant

    My Lowrider2 is up and running.

    1 user thanked author for this post.
    #79856

    Jeffeb3
    Participant

    I think there’s something wrong with your crown. 🙂

    That looks like a nice clean build. Nice work.

    #79872

    David
    Participant

    Needed some thicker paper.

    #79922

    David
    Participant

    Got a good crown with a MPCNC LowRider2.

     

    3 users thanked author for this post.
    #79923

    Ryan
    Keymaster

    BooYah!!!! Looks and sounds great.

     

    I have no idea where the other two comments went…

    #79924

    David
    Participant

    Figuring out a spoilboard gcode.

    #79964

    Barry
    Participant

    Figuring out a spoilboard gcode.

    Make your model of the spoil board about an 8th inch bigger than the board really is.  I had to go over one side of mine with a plane to get a sliver of unmachined mdf off.

    #81406

    David
    Participant

    1 user thanked author for this post.
    #81951

    thatguypeter
    Participant

    What pen holder are you using? How did you attached it?

     

    Peter

    #82153

    David
    Participant

    Peter

     

    I used a Sharpie between two sponges. With two zip ties around it. I put the sponges in the router base. And put a round tool on top for weight.

    #82154

    David
    Participant

    I used a 1″ spoilboard bit to surface the mdf.

     

    1 user thanked author for this post.
    #82192

    Jeffeb3
    Participant

    Looks like you’re making good progress. That should really make the jobs go smoother.

    FYI, you can make all these updates on a single build post.

    #82194

    Jeff
    Participant

    What settings did you use?  Surface speed, depth of cut, etc?  Also, what speed setting was your router on?

    #82816

    David
    Participant

    I used a website to generate the gcode. They are no longer in business.

    #115217

    Jake
    Participant

    Lame question: how did you mount the clip that’s holding your LCD monitor/controller?

    #115245

    Barry
    Participant

    Lame question: how did you mount the clip that’s holding your LCD monitor/controller?

    There’s a clip in the thingiverse files.  Gets zip tied to the frame.

Viewing 18 posts - 1 through 18 (of 18 total)

You must be logged in to reply to this topic.