New MPCNC bulid in Kings Lynn, UK

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC New MPCNC bulid in Kings Lynn, UK

Tagged: , , , ,

This topic contains 2 replies, has 3 voices, and was last updated by  Ryan 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #114267

    Krzysztof
    Participant

    On the begining i want to say hello to You all.

    I’m Cristopher, come from Poland but currently live in UK. I found this MPCNC bulid plans long time ago, tried to bulid it…. but as far  i remember there was website down for quite long time, so i stopped all. After year i found some parts during cleaning “workshop” and decided to check again. All was avalible again, even more information appeared and that was my dream start. I printed all original parts, followed instructions and get it to this state:

    70686305_747280262393875_7118677271124115456_n

    Later I printed rest parts, grab mks gen L (form old 3d printer), wire all up (thanks Ryan for tape measure trick! Love it!) and test it with pen.

    70537714_713198179195811_7347445908121845760_n
    70674867_787404208360479_6256016077357056000_n

    70365185_935123146841782_3315318954095804416_n

     

    That was point where i felt to confident and made huge mistake. I move to steel sheet with 0 knowledge and 0 expernice.

    70504671_459338174794217_3875258521989677056_n
    At this point i snap leg mount and one corner (i think i made it to tight when assembling). I found some mods on fb group so i decided to print “stronger” corners and legs. I think Ryan made it strong enought, but not idiot proof – like me 😀 It was cleary my fault so went back to reading.

     

    Now my MPCN looks like this:

    70463260_533747030709040_5127120813077561344_n

    There is still a lot to learn, to adjust, have to start using auto aquaring etc. Tried fusion360 and post processor but dont know why MPCNC moves so strange. I mean when in f360 I see rapid move (G0) my MPCNC start to move so stupid fast. Thinking if i made something wrong in Marlin? (max speed or something). When it start milling all looks fine.

    At the end want say big thanks to Ryan for sharing this awesome project!

    P.S. Sorry for all mistakes or not good gramma. I had Germany in school. I know, I live couple years in UK  so should speak English…. I had hope to learn English too, but no… now I can speak Russian and Romanian 🙂 If You know what i mean 🙂

    • This topic was modified 1 month ago by  Krzysztof.
    • This topic was modified 1 month ago by  Krzysztof.
    • This topic was modified 1 month ago by  Krzysztof.
    2 users thanked author for this post.
    #114277

    Jamie
    Participant

    Very nice.  Interesting the feet went from burly to pre-burly.

    Also, I now see a problem with my pen drawings: I need better subject matter!

    #114384

    Ryan
    Keymaster

    Looks great. I do suggest learning to cut wood first. Then transition to metals. Lots to learn about CAM before netal.

     

    Welcome to the Crew!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.