new MPCNC, archim 1.0 w/ end stops, motors lock up

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC new MPCNC, archim 1.0 w/ end stops, motors lock up

Tagged: 

This topic contains 3 replies, has 2 voices, and was last updated by  Ryan 2 weeks, 1 day ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #105365

    Ryan
    Participant

    Hi, first post after lurking the last 6 months.

    I’ve got an new build running on an Archim 1.0 build with the Marlin-MPCNC_Archim1_T8_16T_LCD_DualEndstop downloaded from the Allted GitHub page. Currently all I can get it to do is lock all 4 motors down with no movement.

    M119 does acknowledge if the endstop trigger correctly.

    I bought the individual for dual end stop wiring kit from v1, and prior to understanding the board needed the alternate firmware I was able to move some of the motors around using cnc.js

    Was there something I missed in configuration of the firmware? Not sure where to go from here.

     

     

    Attachments:
    #105375

    Ryan
    Keymaster

    Have a look at the firmware page. I have direct links for working Archim firmware. The current version of Marlin has a couple issues I/we are working on.

    #105378

    Ryan
    Participant

    should I be using the version you have on Dropbox or GitHub ?

    #105380

    Ryan
    Keymaster

    Use this link for Archim (series) or Archim (Dual) boards for now.

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.