New Build, Paris

This topic contains 3 replies, has 3 voices, and was last updated by  Alex 2 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #103093

    Nicolas
    Participant

    Hi !

    I also started to build a mpcnc.

    The work area will be 750x750x100.

    Thanks for the design !

    1 user thanked author for this post.
    #103209

    Nicolas
    Participant

    Hello !

    How could i tighen the screw between the roller and the motor mount ? The nut speen with the screw. Shoud i glue the nut inside ?

    Thanks for your help !

     

    #103212

    Jamie
    Participant

    Stick something pointy like a small screwdriver beside the nut. That should stop it from spinning.

    2 users thanked author for this post.
    #103223

    Alex
    Participant

    As Jamie said, I think that the better way, I have used a small flat screwdriver that I put on the right or left (depend on the way it turn) of the nut.
    it’s kinda tricky but it works (for me)

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.