New Build in Columbia SC

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC New Build in Columbia SC

This topic contains 3 replies, has 3 voices, and was last updated by  Ryan 2 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #103401

    Ian
    Participant

    Well, I really needed a bit of an upgrade from the tabletop CNC I had been using with a Dremel as the spindle (Photo for comparison).

    CNC-Comparison

    Welded steel frame, with a baltic birch table top – before I put the MDF killboard in, I milled a 1/8″ recess for it to sit in.

    Full View
    CNC-To-Frame

    24″ x 24″ Total working area with threaded inserts for use of hold downs.

    CNC-Hold-Down

    Storage area underneath for wood up to 36″ long.

    CNC-Underneath-Storage

    If you have any interest in seeing what I put it to use doing shameless plug of my ig, @ianadk.

    Thanks to Ryan for the fantastic design and help troubleshooting with me earlier.

    #103395

    Ian
    Participant
    #103407

    Jeffeb3
    Participant

    before I put the MDF killboard in, I milled a 1/8″ recess for it to sit in.

    That’s a pro move. I think this is a great way to get it super flat.

    #103427

    Ryan
    Keymaster

    Nice setup and the storage!!! Two CNC’s….I bet you have room for another in there.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.