Nema 23


This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 8 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #35750

    Hi Pals:

    I´m building one and almost finishing the hardware section. I hove some nema23 127oz motors available and
    would like to give them a try. I know that they´re not the best option due to weight/drivers but they´re just
    collecting dust here…
    I found the nema23 add on support, . But I´m confused because
    the nema17 support acts also as a clamp for the upper conduit. The nema23 add-on is supposed to be placed in the far
    end, replacing the j-roller-plate… my stupid question is , what is going to keep the upper conduits in place ?
    I could just cut the nema17 support in half and use it as a clamp, but maybe there´s something better to do.

    Thanks !




    Sorry won’t work. That was for the previous model.

    Really is best not to use 23’s anyway.

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.