Lowrider 2, 5'x10', Dual Endstops, Sensorless Homing, SKR 1.3, TMC2130

New Home Forum LowRider Your Builds – LowRider Lowrider 2, 5'x10', Dual Endstops, Sensorless Homing, SKR 1.3, TMC2130

This topic contains 31 replies, has 6 voices, and was last updated by  Ryan 2 months, 2 weeks ago.

Viewing 2 posts - 31 through 32 (of 32 total)
  • Author
    Posts
  • #105719

    Ned van Geffen
    Participant

    It does seem slow in the corners etc. They do plastic and wood on those machines usually, not metal… not sure why it seems slow in the corners, but im definitely no cnc operator haha.
    But for reference, that beast is their small machine 😉

    Anyone maybe have a place for me to start looking regarding my printer moving weird in Z?

    so pocket to -5, move to new pocket at +5 all seemed good
    then move to +1.6 to start ramping into the material, but seemed to have moved to +3 ish
    pocket to -5, which ended up being ~-2
    move to new pocket at +5, which was high at +8 or so
    then move to +1.6 to start ramping into the material, but seemed to double the error to +6 ish

    G Code looked fine…. all the numbers made sense, and the controller even said it was at -1 when taking first pass, but it was very much up in the air

    #105721

    Ryan
    Keymaster

    99% of the time it is your Z rapid speeds.

    1 user thanked author for this post.
Viewing 2 posts - 31 through 32 (of 32 total)

You must be logged in to reply to this topic.