My MPCNC – Wired and Belts

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC My MPCNC – Wired and Belts

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 6 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #53701

    Bob B
    Participant

    Getting to final stages on my build. Have it wired and have made a few test movements to confirm correct direction control. Short a few pieces to make first cut (draw). Hopefully will have complete tomorrow. My printer is grinding out the plastic parts for the MP3DP V2 that will replace my 7 year old Prusa Mendel. My first production cuts on the MPCNC, following testing, will be the flat parts for the MP3DPV 2. Thanks Ryan for two great designs! I look forward to using both.

    #53704

    Ryan
    Keymaster

    Thanks!

    The first good crown draw (from my video) is framed sitting in my living room. Hope is as exciting for you as it was/is for me.

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.