My First Sign

New Home Forum Things You Have Made My First Sign

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 2 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #35062


    This is the largest piece of wood I have cut so far. I used a 18″ circular blank from Home Depot. They have them for $6.25 each here. The main problem I saw with the cutting is that I cut the small text too deep. I realized it after the bottom line cut, then stopped it & adjusted the other 2 lines to cut 1.5mm deep instead of 3mm deep. I used a 1/8″60deg v-bit running at 15mm/sec with a bosch colt router. I used a 1/4″ bullnose bit on the elliptical border. I cut the border 1st to make sure I had the machine pretty level & it looked nice and even on the 1st pass. The 2 holes at the top I added to connect a small rope to hang it with.

    1 user thanked author for this post.


    GEODAVE is back!! Nice looking sign buddy! Tool change and everything, getting fancy.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.