My big build so far :-)

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC My big build so far :-)

This topic contains 3 replies, has 3 voices, and was last updated by  Ryan 5 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #95290


    Hi All,

    Still fixing some issues, but so far so good. Crown worked, plastic/foam and I didn’t really see eye to eye (I was getting annoyed with the foam) and as I like to dive in headfirst, I did a test part in soft wood with a 3-operation job and 2 bit changes. (see pic)

    According to my girlfriend, a rainbow barfed all over the table 🙂 Have been more focused on testing and fixing than cleaning up.

    Plans: will add t-track with spoilboard inbetween the tracks for workholding. And endstops and z-probing. Or maybe I’ll try aluminium first 😉

    Have a good week!


    1 user thanked author for this post.


    Not bad, and the girlfriend is right!  😆

    1 user thanked author for this post.


    Yep, and thanx 🙂



    You already christened it by getting it dirty…now will always be dirty, perfect. One day you will have a big project and the wires might get cleaned up until then no one here minds!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.