MRRF 2019

New Home Forum Updates MRRF 2019

Tagged: ,

This topic contains 47 replies, has 13 voices, and was last updated by  Barry 3 months, 1 week ago.

Viewing 30 posts - 1 through 30 (of 48 total)
  • Author
    Posts
  • #84419

    Ryan
    Keymaster

    Well I have most the reservations set, I should be there for MRRF 2019.

    Looking for another round of ideas for a demo to run. The last plotting demo was awesome but didn’t take long enough to run so my plan B is the same thing but all three machines ISO views.

    Milling is almost certainly out of the question as it is loud and makes a mess.

    Ideas? Suggestions? Complaints?

    #84421

    Guffy
    Participant

    1055283

    you may try to carving on a layer of clay with v-shape wire loop

    Attachments:
    1 user thanked author for this post.
    #84422

    Jeffeb3
    Participant

    Fast is a good thing, right? Hand them out quick?

    What if you had people sign a blank piece of paper and have them hit start. Then it would draw the MPCNC and say, “Made by” next to their signature? Might be cool for people to take a copy and also for celebs you might see.

    1 user thanked author for this post.
    #84429

    Guffy
    Participant

    #84435

    Kelly D
    Participant

    Not sure what you have for cheap take-aways and display bits (business cards, roll up banners etc) but I’m happy to see if I can arm you with printed stuff from up here. Your dollar will go farther than you could imagine and shipping down to you shouldn’t come close to offsetting the savings. Email me privately if you’re interested and I can get you some pricing and ideas. Think VistaPrint costs and then divide by 4. And then do the USD to CAD conversion.

    #84461

    Guffy
    Participant

    Yes, a delicious gift for each visitor – small cookie with “Mpcnc” drawn on top 😉
    A big gcode with pauses between each cookie. Whenever someone came you press encoder and after a minute can give him next decorated cookie.

    Ryan, do you have big syringe? 🙂

    #84463

    BT
    Participant

    How about using a drag knife and producing custom vinyl stickers for pre-cut coasters?

    #84517

    Ryan
    Keymaster

    Not sure what you have for cheap take-aways and display bits

    Well I have the cards covered but no signage at all. I would like something but it would have to be extremely subtle, MRRF isn’t really a trade show, much more like a show & tell / hangout. Let me think about that. In fact I am always kinda bummed that there really is nothing to buy to bring home and try out.

    Thanks for the ideas so far everyone. I am getting some ideas for sure. Some more details maybe. There are periods of several hours straight of conversations, questions. I lose my voice very quickly. So It really might be a good idea to have something short and fast / fun to make where someone can push the button, and something I can hit go and know it will be moving on it’s own for a while. It can get extremely crowded and some people only squeeze by one time and I would really like to always have it moving. Once and a while if I get a free minute I like to hit go and take a quick lap and have a look at some other things.

    PS, if you could possibly come out, I can not recommend it enough. Everyone there (except a few random significant others bored out of there minds) are extremely excited about whatever they have there. Some of the best conversations can be had.

    #84564

    Barry
    Participant

    I’ll be out again, got my pass already, so I won’t have a generic one like last year.

    #84567

    Ryan
    Keymaster

    Awesome!

    I think they were all generic……Maybe make a fixture and let people sharpie names on tags with the CNC?!?

    #84647

    Barry
    Participant

    Sharpie the logo on them!

    #91906

    Ryan
    Keymaster

    Shoot guys, I don’t think I am going to make it. 😥  This move is not going well. I should have been done two weeks ago and I am still stuck in the old place. At this point I will be playing catch up for some time. If I do make it I have nothing prepped to bring so I would just come hang out for a day or two.

    #92104

    Barry
    Participant

    Lame!

    #92156

    Ryan
    Keymaster

    I am trying soooooo hard to make it happen. I have a room still so I have not given up.

    #92301

    Barry
    Participant

    Even if you can’t bring anything, we can still go give Gene a hard time!

    #92722

    Guffy
    Participant

    If you still have no idea what to prepare to show and could quickly add 4 axis (as example turn able head) you can demonstrate some kind of wiring cnc. Something like this

    I don’t know practical usage, but at least it looks cool.

    Even if you make something like that with 3 exusts axis in 2.5D.

    1 user thanked author for this post.
    #92777

    Ryan
    Keymaster

    Even if you can’t bring anything, we can still go give Gene a hard time!

    I am sure he wants to strangle me, I need to go just to hand deliver a beer to apologize for all his frustrations!

     

    If you still have no idea what to prepare to show and could quickly add 4 axis (as example turn able head) you can demonstrate some kind of wiring cnc.

    Shoot at this point me just going would be a minor miracle, bringing anything is looking like a distant dream.

    #92800

    Guffy
    Participant

    do a little miracle not rocket science)
    just drive a few nails into the board (or you can prepare special milled mandrel) and make a “milling” code similar to something like that
    milling_wiring_motor
    and your mpcnc will do the flat motor winding

    #93294

    BT
    Participant

    Just saw this on Thingiverse: the Mulbot – mostly printed 3D printer.  The designer plans on showing it at MRRF 2019

    #93295

    Ryan
    Keymaster

    I hope I can make it!

    #94261

    Ryan
    Keymaster

    Okay, I am going! I have no idea what if anything is coming with me but I will be there!

     

    I still have loads of things to do around here but that is such an amazing event, I need the creative recharge. Hope to see a bunch of you there.

    #94262

    Ryan
    Keymaster

    Dang, I know the schedule is never what they say it is but Friday MRRF “opens” at 5PM, SeeMeCNC is having an open house at 6PM…Dang, Choices.

    #94367

    Barry
    Participant

    I’m going to be at the seeme open house.  Haven’t seen the new place yet.  Went with Gene two years ago to the old place.

    #94369

    Ryan
    Keymaster

    Shoot, I want to go but last time Friday night was packed as people were just getting in. I guess if I get in early and get a spot I can take off.

    #94438

    Barry
    Participant

    Make sure you get a ticket off the eventbright page.

    https://www.eventbrite.com/e/seemecnc-factory-meetup-tickets-58755526361?aff=erellivmlt

    There aren’t many left.

    #94566

    Ronald Hulst
    Participant

    Looking forward to seeing you again.  I plan on getting there earlyish (about noon).  Hopefully doors will be open by that time again.

    #94664

    Ryan
    Keymaster

    Looking forward to seeing you again. I plan on getting there earlyish (about noon). Hopefully doors will be open by that time again.

    Cool, I get in super late Thursday night, then a trip to the toy store (Menard’s) in the morning. I am guessing I will be there about the same time-ish???

     

    Make sure you get a ticket

    Got one, thanks!

     

     

     

    #94751

    Barry
    Participant

    I’m driving out Friday morning, so noonish for me as well.  Staying up in Elkhart, hotel was half the price as any in Goshin.

     

    Driving the truck, so if you need anything let me know.

    #94753

    Ryan
    Keymaster

    Sweet!

    #94935

    frosty
    Participant

    You made it (or at least your MPCNC did). See you tomorrow.

    IMG_20190329_205151069

Viewing 30 posts - 1 through 30 (of 48 total)

You must be logged in to reply to this topic.