March 22, 2018 at 5:44 pm #56002
Ron, I had no idea Friday was a thing. I swear the site said Friday at 5-9 for setup when I booked my flight and room. So Hopefully I will be there before 5. Actually the site still say 3pm…Only the email says noon. Bummer I wouldn’t have minded a few extra hours.
Johnny, Me too. It is better than I expected. I never usually care about such fine detail….I am framing one for sure.March 23, 2018 at 1:21 pm #56053
I have the last spot next to me. look for the flashing star on the wall.March 25, 2018 at 7:51 am #56162
AlexParticipantMarch 26, 2018 at 12:39 pm #56262
Oh jeez, that second pic is ridiculously dweeby…puke..But it is not the only dorky pic I have.
Super dork pic with Brook of Printrbot. We had the opportunity to have areal talk. So awesome.
Well I couldn't possibly look more like a goober here but we had a rad conversation amidst the madness. https://t.co/b57ONT8xaN
— Ryan (@V1Engineering) March 26, 2018
Barry and I drooling over Lulzbots advances. Can’t wait to try it out.
This screen is a winner for sure, me and Barry were giving it a once over! https://t.co/2CZ9rzanmd
— Ryan Zellars (@mpcnc525) March 25, 2018
Got the opportunity to talk to Scott of ThinkyHead / Marlin Mastermind Fame. Talked with Tom From YouTube a few times. He Has some CNC plans for sure…More info coming soon (really nervous). Tom from Digital Machinist fame, came and hung out he also brought his build and sent lots of people my way. Dave from MatterHackers also came by for a great conversation.
The cherry on the cake was getting to shake some hands with you guys and have a real conversation face to face. That is so extremely refreshing. You guys all from such varying backgrounds, freaking fantastic time.
The negatives of MRRF 2018 more people and more tables in the same amount of space. It makes getting around really hard and getting to talk to someone without being in the way of a million people trying to just get by. In three very crazy days, I rarely got the opportunity to leave the table, awesome that that many people stopped in to chat but I did not get to see anything. Barry and I made two quick laps. Ron was next to me the entire time and we never got the opportunity to talk to each other for more than maybe 2 minutes.
High five to you both Ron and Barry, Love Hanging out even if we don’t get much time to talk.
Eagerly awaiting some youtube videos to see what I missed.March 26, 2018 at 3:30 pm #56281
That reminds me. Did Dave say the newer mattercontrol with the CNC stuff was in alpha, or github?March 26, 2018 at 4:08 pm #56285
I am not seeing anything new on github or beta so I am assuming Alpha.March 26, 2018 at 8:11 pm #56336
Anyone wanna try the gcode, it is dual endstop starting with the pen at the surface (I started a bit higher as the Z was set for 1mm)March 27, 2018 at 5:48 am #56376
Might have to look out for this event next year. It’s been a long while since I’ve taken a weekend vacation for myself 🙂March 27, 2018 at 9:45 am #56400
Highly recommend it. Each person is very excited and passionate about whatever they brought. Very few sales pitches. Hard to describe how easily it is for an introvert like myself to get into long conversations with complete strangers at MRRF.March 27, 2018 at 11:40 am #56407
I am getting ready to do something that is really going to make me look like a nervous dork in this video…March 27, 2018 at 4:44 pm #56428
I used a 0.3mm pen and I think it could still be nicer if it didn’t bleed so much….But super stoked with the results.
Anyone wanna try the gcode, it is dual endstop starting with the pen at the surface (I started a bit higher as the Z was set for 1mm)
Can we get the dxf? I’d like to try it on the lowrider.March 27, 2018 at 5:23 pm #56432
Also, loved the reaction of every person you gave your card to. 😆March 27, 2018 at 5:42 pm #56434
I added the Estlcam file with the paths pre-selected and edited for the smaller size. That way you can use my paths and scale it or scale it and make your own paths. If you are going lowrider sized you will probably want new paths. I used the auto select function.
Let me know if that doesn’t work, I don’t have a dxf with the logo I did the combining in estlcam.
The card thing made them worth every penny!March 28, 2018 at 9:17 am #56489
Where at?March 28, 2018 at 9:46 am #56493March 28, 2018 at 10:38 am #56499
Now I see it! Phone must have been caching the page. Just picked up a roll of craft paper at Wally world.March 28, 2018 at 11:11 am #56500
Dude….There was another building I think. Not the one we were in. The 3D printed extrusion printer looks to be in another room…WTF. Where was the race and the other building?March 28, 2018 at 11:42 am #56503
No idea. They need a map!March 28, 2018 at 12:02 pm #56505
Wait, there was a 3d printed extrusion printer??? I didn’t see anything about that.March 28, 2018 at 12:07 pm #56506
Oh, I see. The race was in one of the show barns next door. They just had the race in there, it’s open to the weather.March 28, 2018 at 12:16 pm #56508
The blue and orange printer in this vid is all over twitter at the moment. But I don’t recognize anything around it and it you look in the background It looks like another room, lower ceilings and stuff.March 28, 2018 at 12:19 pm #56509
Whats special about the bronco colored printer? I think this was at mrff, which is just down the road. 🙂March 28, 2018 at 12:21 pm #56510
The blue “extrusions” have been printed. so it was a “mostly printed…..Wait that’s my thing. It was more printed parts than usual.March 28, 2018 at 1:33 pm #56512
That’s over by the concession hallway. If you came out the hall on the end we were on, then hang a left, that’s the corner they were in. I recognize the Dynamism banner.March 28, 2018 at 1:42 pm #56514
I just saw the banner in this video…the stripper dust dude! I made a loop through there one time but there must have been 20 tables crammed in over in the corner.
You can almost see my laziness sitting on the table. Day three I was pooped and hungry.March 28, 2018 at 2:32 pm #56517
Needs a sharper sharpie, and flatter paper. It started to wrinkle as soon as I unrolled it. It’s only 80% humidity..
Also, I found red glitter in my car.. Must have tracked it in on my boots. 🙄 Freaking stripper dust.
Attachments:March 29, 2018 at 4:06 pm #56563
Watching the MRRF videos is fun, it’s like where’s waldo trying to spot either Barry or myself.
Does anyone have a link to the new prototype lulzbot screens? I want to buy one but I can’t find the details. I searched our forums, lulzbot, and google.March 29, 2018 at 4:30 pm #56564
Whats great about their new screen, i havent seen any photos of itMarch 29, 2018 at 4:42 pm #56565March 29, 2018 at 4:45 pm #56568
The screen, is available now ($30 if I remember right), touch screen, no extra marlin library’s needed (no ug8lib), looks sexy…..even for a prototype. When they start getting them in bulk the price will hopefully come down even. Honestly I have been staring at the same two screens for 5 years or so and I am not looking to spend $100+ on the other options out there…wifi isn’t a need or want for me in my controller.
You must be logged in to reply to this topic.