MPCNC test DXF

This topic contains 2 replies, has 3 voices, and was last updated by  Todd Graham 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #72272

    BillW
    Participant

    This dxf file maybe useful for beginners after you have drawn the Ryans Crown.
    You will have to change the file extension from txt to dxf.
    I have not included a gcode, I may use my machine in a different way and don’t want to be responsible for you crashing your Z axis.
    It’s like a mini soak test and will give you a good idea of the squareness.
    If you set the gcode to be say -0.5mm in Z then set the tool or pen just above the work surface it will tell you if your X/Y are parallel to the work surface.

    Hope it is of some use.

    Bill.

     

    2 users thanked author for this post.
    #72277

    Ryan
    Keymaster

    Nice!

    #113261

    Todd Graham
    Participant

    Came across this doing a global Google search for CNC test dxf.    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.