April 29, 2019 at 5:49 am #98591
I’m building a metric MPCNC. Work size will be 500mm x 500mm x 75mm.
I’m using 25mm stainless steel conduits, 2mm thick.
Parts are (being) printed using premium PETG with 0.20mm resolution and Gyroid infill.
Hardware parts bundle is on its way. It reached Paris yesterday and and will soon be held by french customs for rand() * pi * 42 days if everything goes right.
JulienApril 29, 2019 at 2:43 pm #98632
Can’t wait to see it.May 12, 2019 at 2:16 pm #100223May 12, 2019 at 2:18 pm #100227May 12, 2019 at 2:45 pm #100235
holy shit those prints are looking beautiful. what printer are you using?May 12, 2019 at 3:30 pm #100238
I am happy with the quality of the prints. They fill solid but not as breakable as PLA. I hope the CNC will like them as well.
Parts were printed by my Prusa i3 MK3 from https://www.prusa3d.com.
Filament is Prusament PETG, made by Prusa too.
Sliced with Slic3r Prusa Edition with default « 0.15 quality » settings, except for the first layer where I divided speed by 2, and the perimeters set to 6. I use a brim on all prints. For the post processing part I just shave edges of the first layer after removing the brim.June 1, 2019 at 3:12 pm #102223June 1, 2019 at 4:25 pm #102234
Digging the colors!June 1, 2019 at 6:22 pm #102242
Oh man, great looking prints! Really like that color combination!June 1, 2019 at 6:32 pm #102243
I concur, very nice looking prints indeed. Mind if I ask, did you buy the Prusa i3 MK3 preassembled or did you buy the kit version? Thanks!June 2, 2019 at 12:33 am #102281
Thanks guys !
Colors are « Prusa Orange » and « Jet Black ».
did you buy the Prusa i3 MK3 preassembled or did you buy the kit version? Thanks!
I bought the kit. It was much longer to assemble than some pre-assembled chinese kits, but easy enough.
1 user thanked author for this post.June 2, 2019 at 8:50 am #102295
Thanks for the info.June 2, 2019 at 1:35 pm #102314June 2, 2019 at 6:22 pm #102360
I already replied to your other thread but now that I am seeing this again. I would say tighten the 5″ a smidge and maybe loosen the two 1.5″. That in theory should move it a hair the right way.June 9, 2019 at 12:37 pm #102974
I managed to get it square and I ran my first crown test. This week-end’s goal has been achieved.
Here is the result, what do you think ?
1 user thanked author for this post.June 9, 2019 at 1:08 pm #102979
Looks good to me, awesome job! What’s your first project?June 12, 2019 at 1:32 pm #103224
My daughter has a project for this machine, it may be a doll house…
But first I have to install an E-Stop, I crashed the pen several times already 😀
You must be logged in to reply to this topic.