MPCNC at MakerX

New Home Forum Random or Off Topic MPCNC at MakerX

This topic contains 4 replies, has 3 voices, and was last updated by  Ryan 4 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #96265

    David Doyle
    Participant

    This past weekend I was fortunate enough to be able to demo my MPCNC build at MakerX in Columbus, OH.  I used a thin-nib sharpie and pre-setup gcode files to draw about 10 different images. I passed out the images to those that wanted one.

    IMG_0833

    There was a pretty good turnout – around 1,500 people.  Around 10 or so of the folks I spoke with knew what an MPCNC was (had seen one or had built one).  Many were surprised that a 3D printer would be able to provide so many of the parts and were impressed at Ryans design skills.

    IMG_0831

    A decent number of people took a picture of the card I had printed with links to the V1Engineering website and Thingiverse QR codes so I expect some of them will join the fun here!

     

     

    8 users thanked author for this post.
    #96368

    Ryan
    Keymaster

    Maker X? What I wanna go!

    Thank you for showing off such a nice build and getting more people excited about us.

    1 user thanked author for this post.
    #97399

    David Doyle
    Participant

    This year it was one week after MRRF. Unclear what the date for next year’s event will be. Looks like MRRF will be in April next year.

    #97421

    Barry
    Participant

    Damn!  That’s way closer to me than Goshin!

    #97429

    Ryan
    Keymaster

    If they plan it right everyone can just drive from one event to the next.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.