MPCNC Argenta

This topic contains 2 replies, has 3 voices, and was last updated by  Ryan 4 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #63826

    Ariel
    Participant

    Finally I can say it’s finished, some details are missing, like the cable guides (maybe hang them with elastics). But beyond that, it’s working. I am very happy with this machine. It is a great design. Thank you very much everyone for the support and for answering the questions I asked in the forum, you are great.

    The work area is 900×600. The pipes are of stainless steel of 25.4 and 1.6 of thickness. Really with these pipes does not flex absolutely nothing in the center. The electronics are Mks Sbase 1.3 and TFT32, 5Amp Power supply. Steppers Makerparts.

    I am using cambam, I made the attempt with estlcam, but I really could not make the machine do what it was supposed to. With cambam it’s all much clearer, and it does exactly what it’s supposed to do.

    The next step is to learn how to do 2.5d. Any help in this regard will be appreciated. and of course some gcode in 2.5d welcome.

    I already have in mind to build a low rider

     

    https://youtu.be/O7eCrM6KSQc

    https://youtu.be/t4ZGdtjCoLo

     

    2 users thanked author for this post.
    #63834

    Jeffeb3
    Participant

    Great work. Love the estlcam knife man and the elephant.

    1 user thanked author for this post.
    #63845

    Ryan
    Keymaster

    Awesome, I am adding that to the gallery. Looks like you are already doing great with it!

    2 users thanked author for this post.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.