MP3DPD.C. – Th3W0lf3 Build

New Home Forum Milled Printed 3D Printer -MP3DP Your Builds – MP3DP MP3DPD.C. – Th3W0lf3 Build

This topic contains 21 replies, has 6 voices, and was last updated by  Ryan 4 months, 3 weeks ago.

Viewing 22 posts - 1 through 22 (of 22 total)
  • Author
    Posts
  • #75687

    Kyle Wolfe
    Participant

    So it begins!
    I completed my MPCNC about a month ago (after holding the parts for over a year!!).
    Already have a lot of successful aluminum and MDF cuts there. I’m moving out to Denver soon, so I need a new 3D printer to take along for the ride. Working on some XZ frame ideas right now, involving mountains, mountain biking, gears, etc…wanna make it festive! Ideas welcome. I am a bad artist.

    So far, I’ve got half the parts printed and all the hardware ready (All TORX, baby!!). Still waiting on some things from V1 and Amazon, but won’t be needing those for a bit. Gonna start cutting the frame out of 3/8″ Birch today!

    The 220 x 220 heated bed, PSU, stepper motors, and control board are being salvaged from my TEVO Tarantula build. Sick of that dang thing taking up space on the bench.

    Stay tuned!

    #75692

    Jeffeb3
    Participant

    Welcome to Denver! It’s really terrible here. It snows all the time. The people are all idiots. There is no good food or drinks. (None of that is true, but don’t tell anyone 😀 ).

    I can say that 3/8″ BB is working great for my machine. Did you see my LTD design? https://photos.app.goo.gl/a3ro9lecOdsxaLb32 . Living the Dream is a brewery in Highlands Ranch, CO. Pretty good beer, great theme. If you need advice on good mountain biking spots in Denver, I have a few of those too (I live in Golden).

    #75699

    Kyle Wolfe
    Participant

    Hey, yeah I read your build! Drew a little inspiration from your mountain design 🙂
    Let’s ride sometime! I’m hopefully moving out there right before Christmas…just in time for snowy trails.

    #75704

    Jeffeb3
    Participant

    I’m in. I don’t have a fat bike (yet), so we’ll have to wait for a dry day.

    #75731

    Bill
    Participant

    I’m in. I don’t have a fat bike (yet), so we’ll have to wait for a dry day.

    Oh come on… You can print a sleeve to go over the tires and make them fatter and bumpy. 🙂

    #75736

    Kyle Wolfe
    Participant

    Haha, I second that Bill! someone’s gotta make it..

    Yup, I don’t do snow rides either. nooooope.

    #75742

    Barry
    Participant

    I watched a guy destroy a carbon fiber Cannondale trying to ride in the snow.  It didn’t like the cold.

    #75783

    Kyle Wolfe
    Participant

    I watched a guy destroy a carbon fiber Cannondale trying to ride in the snow. It didn’t like the cold.

    Man that is rough! I wonder if he stored his bike in the cold. Micro fractures from cold cycling is a thing. Sad 🙁

    I have a build update coming in a few!

    #75817

    Kyle Wolfe
    Participant

    Update!

    I ended up going with 1/2″ pine plywood – the good stuff. Had issues sourcing decent 3/8″. Meh!

    My first cut was the Y speed plate. While I cut the front and back parts, I worked on fitting the speed plate to my heated bed. Had to drill a hole and countersink for the left side. Worked great! Perfect fit. Cut out the sides last and stained everything a nice dark cherry.
    I cut out everything but the XZ frame…had to work on my creative vision for that. While the stain dried, I  came up with the final XZ design. Pretty happy with it- we’ll see how it turns out tonight!

    Meanwhile, my lil’ bastard Printrbot Metal Plus is cranking out the last few parts. We’re almost to build time, folks!

    #75846

    Ryan
    Keymaster

    Ohhhhhh it’s getting close!

    #75849

    Jeffeb3
    Participant

    That looks awesome! The gear sun setting on the mountains (mountains should be to the West, everyone knows that).

    #75858

    Kyle Wolfe
    Participant

    That looks awesome! The gear sun setting on the mountains (mountains should be to the West, everyone knows that).

    Thanks!! Yes of course, mountains are ALWAYS west, no matter where you are.
    Looks like I wont get this cut out until tomorrow, though. Waaah.

    Here’s another progress pic.

    #75888

    Bill
    Participant

    Actually, as everyone knows, mountains are to the west *and* to the east. Sometimes to the north and south too…

    1 user thanked author for this post.
    #76663

    Kyle Wolfe
    Participant

    Curses!

    Had all my parts laid out, all accounted for. Started assembling…got mostly the whole thing together…go to do the belts…
    Darn Amazon GT2 idler supplier sent me 4mm idlers instead of 6mm. Now I gotta wait until Monday to finish! Waaaah!

    #76702

    Ryan
    Keymaster

    Oh man, that is gut punch for sure.

    #78944

    Barry
    Participant

    Actually, as everyone knows, mountains are to the west *and* to the east. Sometimes to the north and south too…

    Mine were north(Brooks Range) and south(Alaska Range).

    Now I’m in Ohio and the crap they call mountains around here still has trees on top…

    #79019

    Kyle Wolfe
    Participant

    Here she is! Unfortunately, I realized my MPCNC is too small to cutout the frame that I designed. I could’ve changed the XZ frame to be a tad shorter, but then I’d have to redraw the DWG, manually retrace everything in Estlcam, etc…Too excited to get it together! So, for now, the Wolfe MP3DP will sport a poorly sprayed silver XZ frame and charcoal stained AB plywood sides and fronts. I threw on a bottom plate for rigidity and so I could have an excuse to use some of the 100s of rubber feet laying around in the shop..

    So far, I’ve got all axis calibrated and PID tuned. Bed isn’t quite level yet. First print will hopefully come tonight!

    FYI, several parts on this came straight from my old TEVO Tarantula. What a piece of garbage. The MKS 1.6 control board is great, steppers are fine, and still using the heatbed from the TEVO…everything else was trash- especially the dodgy slotted frame. The MP3DP is SUPER solid and will make much better use of these components.

    2 users thanked author for this post.
    #79044

    Kelly D
    Participant

    Ha! Was it you that printed the Nightmare Before Christmas scene? How was the assembly process? I’ve got the STLs in the “someday” file on my hard drive here.

    1 user thanked author for this post.
    #79059

    Kyle Wolfe
    Participant

    Ha! Was it you that printed the Nightmare Before Christmas scene? How was the assembly process? I’ve got the STLs in the “someday” file on my hard drive here.

    Yes! Actually, I hit print and forget- no assembly! I haven’t put the moon in yet, which I suppose would be the one thing that needs assembled. I think the author also included some crosses to go on the tombstones, but I omitted them. It came out perfect!
    That was made on my Printrbot Metal Plus. Or, what is now a Printrbot Metal Plus with none of the original electronics…had to replace the board with a Ramps 1.6 after PB went belly up. heh.

    1 user thanked author for this post.
    #79061

    Kyle Wolfe
    Participant

    Ooo, the curl has to be assembled too. The assembly there wasn’t hard, but printing the curl by itself was a little annoying. Ended up using a bunch of support material and printing at like 15mm/s. Took a couple tries.

    #90313

    Kyle Wolfe
    Participant

    Alright! A bit of a two month break there..
    I live in Denver now! Love it here. Now that I’m all settled in, figured it was time to put the finishing touches on the MP3DP and get a first print going…

    Benchy 1 was almost perfect- filament wasn’t feeding properly on my spool due to over tightening. Fixed in a PERFECT Benchy 2. Went straight on to print the Fallout Alien Blaster handle (I’m making a bunch for my dad’s play).
    Immaculate. Breathtaking. Perfection. This came out better than my old $1400 Printrbot Metal Plus.

    I did almost nothing to improve print quality after the initial build. Can’t speak highly enough of this build, the fun I had building and printing every component. Can’t beat the feeling of printing parts for a CNC, building a CNC, cutting parts for a printer, and building a printer from scratch. I’m just blown away.

    Thank you Ryan for sharing your passion with the rest of us! Your design skills are unmatched in this area.

     

    1 user thanked author for this post.
    #90380

    Ryan
    Keymaster

    Awesome, the enthusiasm is contagious!

    1 user thanked author for this post.
Viewing 22 posts - 1 through 22 (of 22 total)

You must be logged in to reply to this topic.