Mini Rambo Not Responding

New Home Forum LowRider Troubleshooting – LowRider Mini Rambo Not Responding

This topic contains 3 replies, has 2 voices, and was last updated by  Ryan 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #53367

    Frank
    Participant

    Hi all,

    So I followed the instruction in flashing the mini-rambo and connected the wiring. However, the motors won’t respond. I tried connecting to Repetier host. It shows it is connected but commands won’t go through. I have tried with Estlcam as well, but nothing worked.

    I have installed the driver for the card.

    P.S everything time I’ve tried moving the motors with the LCD screen, the card resets whenever I tried to do any action on it.

    Please help. I will try to figure it out on my own as well.

    #53370

    Frank
    Participant

    *Update

    It is the Baud Rate, I have to set it to 250000. Solved my problem.

    #53371

    Ryan
    Keymaster

    With just the LCD connected and no usb, what happens?

     

    #53372

    Ryan
    Keymaster
    It is the Baud Rate, I have to set it to 250000. Solved my problem.

    Sweet!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.