Mini Rambo Case?

This topic contains 30 replies, has 6 voices, and was last updated by  geodave 2 years, 1 month ago.

Viewing 31 post (of 31 total)
  • Author
    Posts
  • #43525

    geodave
    Participant

    I may finally put this project to rest after making another remix of it.  This one lets you add a raspberry pi to the outside back, inside back or the top plate and use the Arduino Mega or Rambo Mini in the bottom & have an LCD2004 or graphics LCD on the front. https://www.thingiverse.com/thing:2525426.  I changed the angle of the front plate from 60 degrees to 75 degrees so I would not have to increase the width of the case.  I also added some hex holes to the top plate for passive heat release.  You can also open this in thingiverse customizer and change all kinds of variables.  I have the front angle adjustable from any acute angle to 90 degrees.  I thought about making it so you could use an obtuse angle.  I am not sure that would be very practical, but might look cool.

Viewing 31 post (of 31 total)

You must be logged in to reply to this topic.