Marlin firmware install error

New Home Forum LowRider Troubleshooting – LowRider Marlin firmware install error

This topic contains 2 replies, has 3 voices, and was last updated by  Jeffeb3 2 weeks, 3 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #108642

    Mik
    Participant

    Hi Guys

    When i try to install v1 engineering marlin firmware, i get this error

     

    Arduino: 1.8.9 (Windows 10), Board: “Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)”

    Sketch uses 112838 bytes (44%) of program storage space. Maximum is 253952 bytes.
    Global variables use 4713 bytes (57%) of dynamic memory, leaving 3479 bytes for local variables. Maximum is 8192 bytes.
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_ReceiveMessage(): timeout
    avrdude: stk500v2_getsync(): timeout communicating with programmer
    An error occurred while uploading the sketch

    This report would have more information with
    “Show verbose output during compilation”
    option enabled in File -> Preferences.

    #108677

    Jamie
    Participant

    If you have another program connected to the board you have to disconnect it first. Either that, or you haven’t got the right COM port selected.

    Other failures are possible but those are the most likely.

    #108680

    Jeffeb3
    Participant

    If it’s a rambo or mini rambo, then you also need to hook up the 12V.

    That error isn’t with the code, it can’t talk to the board.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.