- January 5, 2018 at 11:45 am #50548
Since I finished the machine I am in love with her, she allowed me to create a lot of things quickly and very economically.
LigthBox Photography studio
A decent light box can cost up to 100 dollars. For only 25 dollars I could build mine.
2 feet wide x 15 inches deep and 15 high.
Use 3 feet of led lights and a polywall panel purchased from Homedepot.
Diy 20$ dolars Ligth Box photography mini studio. @flyinglowar thanks for the design !!! #ligthbox #homemadeligthbox #photooftheday #photographystudio #photographybox #photobox #studioligth #cncrouter #diycnc #mpcncrouter #mpcnc #diy #diylighting @benjaminuyeda and idea for your next projects I made this one with "polywall" via homedepot.
A post shared by Marcos Canabal (@marcos_canabal) on
Quadcopter FPV Launch Pad
This is a project in which we are making prototypes of a platform for launching drones.
The final idea is to make it in acrylic.
With @flyinglowar we are very proud to announce our first model of LaunchPad for FPV drones. A way to go !!!!! Un trabajo de desarrollo y estudio de mercado muy importante que en breve vera la luz . #fpvlaunch #fpvlaunchpad #flyinglowar #dronfpvlaunchpad #multigpdroneracing #dronracing #fpvracing #3dprint #3Dprinting #diycnc #diycncrouter #rapidprototyping #multirotor #tinyworld #tinywoop #quadcopter #launchpad
A post shared by Marcos Canabal (@marcos_canabal) onJanuary 8, 2018 at 7:11 am #50695
I like the quadcopter launch. You should put tick marks as engravings for every 5º angle so pilots can match the launch angle to their lens angle.January 23, 2018 at 9:04 am #51562
A coat rack to dry towels
1 user thanked author for this post.January 24, 2018 at 7:24 am #51626
How will you be attaching the back and sides together? What about the dowel attachment?January 24, 2018 at 6:36 pm #51688
I Use wood glue and some screws.
and pieces printed in 3D.
Attachments:January 24, 2018 at 8:24 pm #51698
Nice! Might have been a good place to play with finger joints on the sides…May 25, 2018 at 9:38 pm #60546
Hello everyone, tomorrow I will be making that new lamp for my dining room.
I have a kind of old chandelier …
I will try to improve them with this new design.
1 user thanked author for this post.May 26, 2018 at 5:13 am #60553
You must be logged in to reply to this topic.