June 28, 2019 at 1:31 am #104560
I have started collecting collets, endmills and other bits for my Dewalt 611 and wanted a place to put them. I found a design for milling one – https://www.thingiverse.com/thing:612630 but I wanted a printed one with a cover, so I edited the basic design in Illustrator and made a quick design in Tinkercad (haven’t jumped into Fusion 360 yet). The side needed some art so I found some random logo on the internet to use. Red for sharp! Zip with STL for those that want it. I would suggest under sizing the lid a bit to get it tighter depending on how accurate your printer is. Mine is spot on and the lid is too loose.
Attachments:June 28, 2019 at 4:25 am #104572June 28, 2019 at 10:09 am #104596June 28, 2019 at 10:13 am #104599
Well I guess I am not in trouble for grabbing the logo. I wasn’t sure what your policy was on that since it wasn’t stated on the logo page.June 28, 2019 at 10:15 am #104601
I am starting to realize I need more concrete rules for things, up to this point I have had no issues but now I am really trying to figure out where to drawn the line.June 30, 2019 at 11:09 pm #104808
You must be logged in to reply to this topic.