Lowrider2 Cradle Design

New Home Forum LowRider Hardware Development – LowRider Lowrider2 Cradle Design

This topic contains 4 replies, has 3 voices, and was last updated by  Mike @Pix2Proto 1 month, 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #94201

    Mike @Pix2Proto
    Participant

    I made a cradle design based on Jeb’s that allows you to fold it out of the way if you need to use the full bed.

    1 user thanked author for this post.
    #95174

    Frederik
    Participant

    I’m actually using a 2mm foam sheet that I’ve wrapped around the plate and can lock in place using a velcro pads. I’ve cut the lower part of it into 15mm or so strips. It works beautifully and is super easy to take off if needed.

    1 user thanked author for this post.
    #97665

    Mike @Pix2Proto
    Participant

    I was getting some deflection with version 1, so here is version 2!

    1 user thanked author for this post.
    #103897

    Cameron L.
    Participant

    Any chance I could get the file for your LR2 Cradle?

    #104946

    Mike @Pix2Proto
    Participant

    Cameron,

    I am very sorry I just saw your post.  I have attached the files I designed in Fusion360 here in .step format.  Hopefully its useful.

    -Mike

    1 user thanked author for this post.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.