Lowrider flat parts from Nebraska available

New Home Forum For Sale, Leftovers, Used Parts, Services Offered Lowrider flat parts from Nebraska available

This topic contains 10 replies, has 5 voices, and was last updated by  Dan Roesch 1 week ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #94059

    Dan Roesch
    Participant

    June 2019 Update:

    I am very thankful to be able to support the V1 community in this way! I have created a PayPal link to make things easier for everyone!

    Size
    Special Instructions

    I am charging $85 a set for Lowrider V2 flat parts in the recommended MDF. Shipping is included and a portion goes to Ryan for all his hard work. I can only ship in the US.

    If this post is active then I have parts available and usually can get them in the mail in one or two days max. Make sure to include your mailing address and email with your PayPal payment.

    You can also reach out to me directly at [email protected]

    Thanks!

    Dan

    • This topic was modified 1 week ago by  Dan Roesch.
    • This topic was modified 1 week ago by  Dan Roesch.
    • This topic was modified 5 days, 14 hours ago by  Ryan. Reason: Updated w/ button
    2 users thanked author for this post.
    #95374

    Sal
    Participant

    Hi Dan,

     

    Is a set still available?  Thanks

    #95377

    Dan Roesch
    Participant

    Yes for sure! Send me an email with your address so we can go over the details!

    [email protected]

     

    Update: June 2019

    Check the top of this thread for link to order!

    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 5 days, 13 hours ago by  Dan Roesch.
    #100365

    Ryan
    Keymaster

    Thank you!

    1 user thanked author for this post.
    #100824

    Dan Roesch
    Participant

    I have cut some more sets so if anyone else need some, let me know!

     

    Dan

    #101054

    Joe
    Participant

    Dan,

     

    Just to confirm, the sets you are cutting can be used with the 25mm and 25.4mm kits?  If so, I would be interested in a set if you have one available.

    M

    #101069

    Dan Roesch
    Participant
    Joe

    The parts are different based on which size you are going to use.

    There are two sizes based on the outer diameter of the tubes you plan to use.

    25.4mm is the most common size I’ve seen people use in the US along with 1in OD(24.5mm) stainless steel tubes.  The standard thickness of the part stays the same which is ½” for the Y plates and ¼” for the 611 plate.

    There is also a version for 25mm tubes.

    Which size are you looking for?

    Update: June 2019

    Check the top of this thread for link to order!

    Thanks!
    • This reply was modified 3 weeks, 5 days ago by  Dan Roesch.
    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 5 days, 13 hours ago by  Dan Roesch.
    #101342

    Joe
    Participant

    I am looking for the 25mm kit.

    #102928

    James
    Participant

    Hi, new here, so forgive my impromptu post, I will post something more formal in the way of introductions elsewhere.

    I am printing the 25.4mm parts for the Lowrider 2 on my Folgertech FT-5 R2 as I type.

    I was hoping to, maybe in a few weeks, order a set of the 25.4mm flat parts as the official store is out of stock.

    Would that be possible?

    TIA

    #102963

    Dan Roesch
    Participant

    James,

    Of course that would be great! When you’re ready you can send me $85 through PayPal to [email protected] and I will get them right in the mail for you!
    Thanks for reaching out!
    Dan

    Update: June 2019

    Check the top of this thread for link to order!

    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 5 days, 13 hours ago by  Dan Roesch.
    #103047

    Dan Roesch
    Participant

    June 2019 Update:

    I am very thankful to be able to support the V1 community in this way! I have created a PayPal link to make things easier for everyone!

    Size
    Special Instructions

    I am charging $85 a set for Lowrider V2 flat parts in the recommended MDF. Shipping is included and a portion goes to Ryan for all his hard work.  I can only ship in the US.

    If this post is active then I have parts available and usually can get them in the mail in one or two days max. Make sure to include your mailing address and email with your PayPal payment.

    You can also reach out to me directly at [email protected]

    Thanks!

    Dan

    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 1 week ago by  Dan Roesch.
    • This reply was modified 6 days, 8 hours ago by  Dan Roesch.
    • This reply was modified 6 days, 7 hours ago by  Dan Roesch.
    • This reply was modified 6 days, 7 hours ago by  Ryan.
    • This reply was modified 6 days, 7 hours ago by  Ryan. Reason: link fix
Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.