Lowrider build from St Louis

New Home Forum LowRider Your Builds – LowRider Lowrider build from St Louis

This topic contains 8 replies, has 3 voices, and was last updated by  Brent 2 weeks, 4 days ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #104268

    Chadd Giesing
    Participant

    #gobigorgohome  or is it #gobigandtakeithome

    Currently building a 50″x108″x7″ lowrider 2.  waste board is kept to a 48″x96″ size.  But setting it up to flatten slabs of wood or whatever fits on the bed.  Offset in 1 direction to clamp things to the end of the bed or in the future to add tool change area.  I am wrapping up the build this week.  Still need to build the cabinets it will sit on.  But saw horses are good enough for now.

    Nema 17 motors
    Ramps 1.4 board
    LCD controller with SD card
    Craftsman 1.75hp 1/2″ collet router with built in LED lights.
    2.5″ dust collection port, still using ryans router base.

    Dust collection will be finished tonight.  Bolting it on.  Finishing wiring tonight.  Doing some tests before putting it back on the table.

    #104277

    Ryan
    Keymaster

    Cool, Can’t wait to see it dirty!

    #104380

    Chadd Giesing
    Participant
    #104427

    Ryan
    Keymaster

    Careful of letting all that weight stretch your couplers.

    #104428

    Chadd Giesing
    Participant

    Very true.  Trial and error.  Great starting point.  Will keep upgrading as I need it.

    #104429

    Chadd Giesing
    Participant

    When I add the 2.5″ dust collection hose.  It will be above the machine on a swing arm.

    #104524

    Chadd Giesing
    Participant

    Router adapter and dust collection can be found here.

    https://www.thingiverse.com/thing:3716633

    #104579

    Chadd Giesing
    Participant

    Getting so close.  But so far away from the finish line.

    #104607

    Brent
    Participant

    That table looks great, and it looks like you’ve created some useful additional storage underneath.  Given what you’ve done so far you’re a lot closer to having it run than you think.

    1 user thanked author for this post.
Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.