Lowrider 2 The Netherlands

New Home Forum LowRider Your Builds – LowRider Lowrider 2 The Netherlands

This topic contains 6 replies, has 7 voices, and was last updated by  Marjo (Belgium) 1 month, 3 weeks ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #109102

    jackomalo
    Participant
    #109124

    Bill
    Participant

    Nice, now get it dirty! 🙂

    1 user thanked author for this post.
    #109211

    Ryan
    Keymaster

    Fancy, I love it!!!!

    #109306

    Harmen Kuijer
    Participant

    Cool design! Enjoy it!

    Veel plezier ermee 😉

    #109479

    GANI
    Participant

    Hello to all

    kindly advise while using this machine for the commercial purposes ( usage time 3 to 6 hours per day) what are the advantages and disadvantages in your experienced. Because I have a plan to use this  CNC for fabrication work shop

    Notes for your better understand.
    1.my Work Space is 1300 mm X 3000 mm.(fab sheet size)
    2.my Tool  head is marking pen (to draw on sheet )

    #109528

    Jeffeb3
    Participant

    GANI, probably better to start a new thread and ask more specific questions. There is also a lot of info linkes in the top menu bar to better understand what is needed. Reading through the assembly instructions and the CAM tutorials will help you understand what is required.

    1 user thanked author for this post.
    #110915

    Marjo (Belgium)
    Participant

    Nice…. Have fun with it!

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.